World Library  
Flag as Inappropriate
Email this Article

Cavity magnetron


Cavity magnetron

Magnetron with section removed to exhibit the cavities. The cathode in the center is not visible. The waveguide emitting microwaves is at the left. The magnet producing a field parallel to the long axis of the device is not shown.
A similar magnetron with a different section removed. Central cathode is visible; antenna conducting microwaves at the top; magnet is not shown.
Obsolete 9 GHz magnetron tube and magnets from a Soviet aircraft radar. The tube is embraced between the poles of two horseshoe-shaped alnico magnets (top, bottom), which create a magnetic field along the axis of the tube. The microwaves are emitted from the waveguide aperture (top) which in use is attached to a waveguide conducting the microwaves to the radar antenna. Modern tubes use rare earth magnets which are much less bulky.

The cavity magnetron is a high-powered vacuum tube that generates microwaves using the interaction of a stream of electrons with a magnetic field while moving past a series of open metal cavities (cavity resonators). Bunches of electrons passing by the openings to the cavities excite radio wave oscillations in the cavity, much as a guitar's strings excite sound in its sound box. The frequency of the microwaves produced, the resonant frequency, is determined by the cavities' physical dimensions. Unlike other microwave tubes, such as the klystron and traveling-wave tube (TWT), the magnetron cannot function as an amplifier, increasing the power of an applied microwave signal, it serves solely as an oscillator, generating a microwave signal from direct current power supplied to the tube.

The first form of magnetron tube, the split-anode magnetron, was invented by Albert Hull in 1920, but it wasn't capable of high frequencies and was little used. Similar devices were experimented with by many teams through the 1920s and 30s. The modern 'resonant' cavity magnetron tube was invented by John Randall and Harry Boot in 1940 at the University of Birmingham, England.[1] The high power of pulses from their device made centimeter-band radar practical, with shorter wavelength radars allowing detection of smaller objects from smaller antennas. The compact cavity magnetron tube drastically reduced the size of radar sets[2] so that they could be installed in anti-submarine aircraft[3] and escort ships.[2]

In the post-war era the magnetron became less widely used in the radar role. This was due to the fact that the magnetron's output changes from pulse to pulse, both in frequency and phase. This makes the signal unsuitable for pulse-to-pulse comparisons, which is widely used for detecting and removing "clutter" from the radar display.[4] The magnetron remains in use in some radars, but has become much more common as a low-cost microwave source for microwave ovens. In this form, approximately one billion magnetrons are in use today.[4][5]


  • Construction and operation 1
    • Basic concept 1.1
    • Microwave source 1.2
    • Split-anode magnetron 1.3
    • Cavity magnetron 1.4
  • Common features 2
  • Applications 3
    • Radar 3.1
    • Heating 3.2
    • Lighting 3.3
  • History 4
  • Health hazards 5
  • See also 6
  • References 7
  • External links 8

Construction and operation

Basic concept

In a conventional vacuum tube, electrons are emitted from a heated cathode and are attracted to the anode as it is positive with respect to the cathode. The components are normally arranged concentrically, with the cathode at the centre, giving them their traditional cylindrical shape. In vacuum tubes (valves), the current can flow only from the cathode to the anode, providing rectification although this function is usually performed by the diode. A triode adds a control grid which allows the flow of current to be further controlled in magnitude, and thereby provides an amplification function.[6]

The idea of using a grid for control was heavily patented by Lee de Forest, and this caused considerable research into alternate concepts for tube designs that would avoid his patents. This led to experiments with tubes using magnetic fields instead of electrical ones, including the original magnetron. In this case the tube was arranged in the form of two concentric electrodes, typically with the cathode in the form of a metal rod in the center, and the anode as a cylinder around it. This arrangement was then placed between the poles of a horseshoe magnet[7] arranged such that the magnetic field was aligned parallel to the axis of the electrodes.

With no magnetic field present, the electrons will flow directly from the cathode to the anode, operating as a diode. In the presence of the magnetic field, the electrons will experience a force at right angles to their direction of motion, according to the left-hand rule. In this case, the electron will follow a curved path between the cathode and anode. The curvature of the path can be controlled by varying either the magnetic field, as in an electromagnet, or by changing the electrical potential across the electrodes.

At very high magnetic field settings the electrons are forced back onto the cathode, preventing current flow. At the opposite extreme, with no field, the electrons are free to flow. There is a point between the two, the critical value or Hull cut-off magnetic field (and cut-off voltage), where the electrons just reach the anode. At fields around this point, the device operates similar to a triode. However, due to hysteresis and other effects, the control timing is not as fast as the electrostatic control in a conventional triode, and magnetrons saw limited use in conventional electronic designs.[7]

Microwave source

It was noticed that when the magnetron was operating at the critical value that it would begin to give off radio frequency signals.[7] This occurred because the path, when properly adjusted, would cause some of the electrons to circle between the cathode and anode. Due to an effect now known as synchrotron radiation, this causes the electron to radiate. The effect was not very efficient; eventually the electrons would hit one of the electrodes, so the number in the circulating state at any given time was a small percentage of the overall current.

It was also noticed that the frequency of the radiation was simply a function of the size of the tube, and even early examples were built that produced signals in the microwave region. When used in conventional oscillator and amplifier circuits, tube systems were limited to high frequency bands, with very high frequency systems becoming widely available in the late 1930s. Ultra-high and microwave regions were well beyond the ability for conventional circuits, and the magnetron was one of the only devices known to generate signals in this band.

Split-anode magnetron

The original magnetron was very difficult to keep operating at the critical value, and even then the number of electrons in the circling state at any time was fairly low. This meant that it produced very low-power signals. Nevertheless, as one of the few devices known to create microwaves, interest in the device and potential improvements was widespread.

The first major improvement was the split-anode magnetron, also known as a negative-resistance magnetron. As the name implies, this design used an anode that was split in two, creating two half-cylinders. When both were charged to the same voltage the system worked like the original model. But by altering the voltage of the two plates, the electron's trajectory could be modified so that they would naturally travel towards the lower voltage side. The plates were connected to an oscillator that reversed the relative voltage of the two plates at a given frequency.[7]

At any given instant, the electron will naturally be pushed towards the lower-voltage side of the tube. The electron will then oscillate back and forth and the voltage changes. At the same time, a strong magnetic field is applied, stronger than the critical value in the original design. This would normally cause the electron to circle back to the cathode, but due to the oscillating electrical field, the electron instead follows a looping path that continues toward the anodes.[7]

Since all of the electrons in the flow experienced this looping motion, the amount of RF energy being radiated was greatly improved. And as the motion occurred at any field level beyond the critical value, it was no longer necessary to carefully tune the fields and voltages, and the overall stability of the device was greatly improved. Unfortunately, the higher field also meant that electrons often circled back to the cathode, depositing their energy on it and causing it to heat up. As this normally causes more electrons to be released, it could sometimes lead to a runaway effect.[7]

Cavity magnetron

The great advance in magnetron design was the cavity magnetron or electron-resonance magnetron, which works on entirely different principles. In this design the oscillation is created by the physical shaping of the anode, rather than external circuits or fields.

Mechanically, the cavity magnetron consists of a large cylinder of metal with a hole drilled through the center of circular face. A wire acting as the cathode is run down the center of this hole, and the metal block itself forms the anode. Around this hole, known as the "interaction space", are a number of similar holes drilled parallel to the interaction space, separated only a very short distance away. A small slot is cut between the interaction space and each of these additional holes, the "resonators". The resulting block looks something like the cylinder on a revolver, with a somewhat larger central hole. Early models were cut using Colt pistol jigs. The parallel sides of the slots acted as a capacitor while the anode block itself provided an inductor analog. Thus, each cavity formed its own tuned oscillator, the frequency of which was defined by the energy of the electrons and the physical dimensions of the cavity.[7]

The magnetic field is set to a value well below the critical, so the electrons follow arcing paths towards the anode. When they strike the anode, they cause it to become negatively charged in that region. As this process is random, some areas will become more or less charged than the areas around them. The anode is constructed of a highly conductive material, almost always copper, so these differences in voltage cause currents to appear to even them out. Since the current has to flow around the outside of the cavity, this process takes time. During that time additional electrons will avoid the hot spots and be deposited further along the anode, as the additional current flowing around it arrives too. This causes an oscillating current to form as the current tries to equalize one spot then another.[8]

The oscillating currents flowing around the cavities, and their effect on the electron flow within the tube, causes large amounts of microwaves to be created in the cavities. The cavities are open on one end, so the entire mechanism forms a single larger microwave oscillator. A "tap", normally a wire formed into a loop, extracts microwave energy from one of the cavities. In some systems the tap wire is replaced by an open hole, which allows the microwaves to flow into a waveguide.

As the oscillation takes some time to set up, and is inherently random at the start, subsequent startups will have different output parameters. Phase is almost never preserved, which makes the magnetron difficult to use in phased array systems. Frequency also drifts pulse to pulse, a more difficult problem for a wider array of radar systems. Neither of these present a problem for some continuous-wave radars, nor for microwave ovens.

Common features

All cavity magnetrons consist of a hot cathode with a high (continuous or pulsed) negative potential created by a high-voltage, direct-current power supply. The cathode is built into the center of an evacuated, lobed, circular chamber. A magnetic field parallel to the filament is imposed by a permanent magnet. The magnetic field causes the electrons, attracted to the (relatively) positive outer part of the chamber, to spiral outward in a circular path, a consequence of the Lorentz force. Spaced around the rim of the chamber are cylindrical cavities. The cavities are open along their length and connect the common cavity space. As electrons sweep past these openings, they induce a resonant, high-frequency radio field in the cavity, which in turn causes the electrons to bunch into groups. (This principle of cavity resonator is very similar to blowing a stream of air across the open top of a glass pop bottle.) A portion of the field is extracted with a short antenna that is connected to a waveguide (a metal tube usually of rectangular cross section). The waveguide directs the extracted RF energy to the load, which may be a cooking chamber in a microwave oven or a high-gain antenna in the case of radar.

A cross-sectional diagram of a resonant cavity magnetron. Magnetic lines of force are parallel to the geometric axis of this structure.

The sizes of the cavities determine the resonant frequency, and thereby the frequency of emitted microwaves. However, the frequency is not precisely controllable. The operating frequency varies with changes in load impedance, with changes in the supply current, and with the temperature of the tube.[9] This is not a problem in uses such as heating, or in some forms of radar where the receiver can be synchronized with an imprecise magnetron frequency. Where precise frequencies are needed, other devices such as the klystron are used.

The magnetron is a self-oscillating device requiring no external elements other than a power supply. A well-defined threshold anode voltage must be applied before oscillation will build up; this voltage is a function of the dimensions of the resonant cavity, and the applied magnetic field. In pulsed applications there is a delay of several cycles before the oscillator achieves full peak power, and the build-up of anode voltage must be coordinated with the build-up of oscillator output.[9]

Where there are an even number of cavities, two concentric rings can connect alternate cavity walls to prevent inefficient modes of oscillation. This is called Pi strapping because the two straps lock the phase difference between adjacent cavities at Pi radians (180°).

The magnetron is a fairly efficient device. In a microwave oven, for instance, a 1.1 kilowatt input will generally create about 700 watts of microwave power, an efficiency of around 65%. (The high-voltage and the properties of the cathode determine the power of a magnetron.) Large S band magnetrons can produce up to 2.5 megawatts peak power with an average power of 3.75 kW.[9] Large magnetrons can be water cooled. The magnetron remains in widespread use in roles which require high power, but where precise control over frequency and phase is unimportant.


Magnetron from a microwave oven with magnet in its mounting box. The horizontal plates form a heat sink, cooled by airflow from a fan. The magnetic field is produced by two powerful ring magnets, the lower of which is just visible. Almost all modern oven magnetrons are of similar layout and appearance.


In radar devices, the waveguide is connected to an antenna. The magnetron is operated with very short pulses of applied voltage, resulting in a short pulse of high power microwave energy being radiated. As in all primary radar systems, the radiation reflected off a target is analyzed to produce a radar map on a screen.

Several characteristics of the magnetron's power output conspire to make radar use of the device somewhat problematic. The first of these factors is the magnetron's inherent instability in its transmitter frequency. This instability is noted not only as a frequency shift from one pulse to the next, but also a frequency shift within an individual transmitted pulse. The second factor is that the energy of the transmitted pulse is spread over a wide frequency spectrum, which makes necessary its receiver to have a corresponding wide selectivity. This wide selectivity allows ambient electrical noise to be accepted into the receiver, thus obscuring somewhat the received radar echoes, thereby reducing overall radar performance. The third factor, depending on application, is the radiation hazard caused by the use of high power electromagnetic radiation. In some applications, for example a marine radar mounted on a recreational vessel, a radar with a magnetron output of 2 to 4 kilowatts is often found mounted very near an area occupied by crew or passengers. In practical use, these factors have been overcome, or merely accepted, and there are today thousands of magnetron aviation and marine radar units in service. Recent advances in aviation weather avoidance radar and in marine radar have successfully implemented semiconductor transmitters that eliminate the magnetron entirely. More precise sources allow the use of lower output powers.


In microwave ovens, the waveguide leads to a radio frequency-transparent port into the cooking chamber. As the fixed dimensions of the chamber, and it's physical closeness to the magnetron, would normally create standing wave patterns in the chamber, a motorized fan-like stirrer is placed in the waveguide to randomize the pattern. This is not always effective for larger objects in the chamber, and most modern microwave ovens also include a rotating table for the food to sit on, the turntable.


In microwave-excited lighting systems, such as a sulfur lamp, a magnetron provides the microwave field that is passed through a waveguide to the lighting cavity containing the light-emitting substance (e.g., sulfur, metal halides, etc.). These lamps are currently uncommon due to the high complexity relative to traditional lighting methods.


In 1921, Swiss physicist Heinrich Greinacher was looking for new ways to calculate the electron mass. He settled on a system consisting of a diode with a cylindrical anode surrounding a rod-shaped cathode, placed in the middle of a magnet. The attempt to measure the electron mass failed because he was unable to achieve a good vacuum in the tube. However, as part of this work, Greinacher developed mathematical models of the motion of the electrons in the crossed magnetic and electric fields.[10]

In the US, Albert Hull put this work to use in an attempt to bypass Western Electric's patents on the triode, which they had gained by buying Lee De Forest's patents on the control of current flow using electric fields via the "grid". Hull intended to use a variable magnetic field, instead of an electrostatic one, to control the flow of the electrons from the cathode to the anode. Working at General Electric's Research Laboratories in Schenectady, New York, Hull built tubes that provided switching through the control of the ratio of the magnetic and electric field strengths. He released several papers and patents on the concept in 1921.[11]

Hull's magnetron was not originally intended to generate VHF (very-high-frequency) electromagnetic waves. However, in 1924, Czech physicist August Žáček[12] (1886–1961) and German physicist Erich Habann[13] (1892–1968) independently discovered that the magnetron could generate waves of 100 megahertz to 1 gigahertz. Žáček, a professor at Prague's Charles University, published first; however, he published in a journal with a small circulation and thus attracted little attention.[14] Habann, a student at the University of Jena, investigated the magnetron for his doctoral dissertation of 1924.[15] Throughout the 1920s, Hull and other researchers around the world worked to develop the magnetron.[16][17][18] Most of these early magnetrons were glass vacuum tubes with multiple anodes. However, the two-pole magnetron, also known as a split-anode magnetron, had relatively low efficiency. The cavity version (properly referred to as a resonant-cavity magnetron) proved to be far more useful. In 1937-1940 a multi-cavity magnetron was built by the British physicist John Randall, together with a team of British coworkers, for the British and American military radar installations in World War II.[19]

While radar was being developed during World War II, there arose an urgent need for a high-power microwave generator that worked at shorter wavelengths (around 10 cm (3 GHz)) rather than the 150 cm (200 MHz) that was available from tube-based generators of the time. It was known that a multi-cavity resonant magnetron had been developed and patented in 1935 by Hans Hollmann in Berlin.[20] However, the German military considered the frequency drift of Hollman's device to be undesirable, and based their radar systems on the klystron instead. But klystrons could not at that time achieve the high power output that magnetrons eventually reached. This was one reason that German night fighter radars were not a match for their British counterparts.[21]

The anode block which is part of the cavity magnetron developed by John Randall and Harry Boot in 1940 at the University of Birmingham.

In 1940, at the University of Birmingham in the United Kingdom, John Randall and Harry Boot produced a working prototype similar to Hollman's cavity magnetron, but added liquid cooling and a stronger cavity. Randall and Boot soon managed to increase its power output 100 fold. Instead of abandoning the magnetron due to its frequency instability, they sampled the output signal and synchronized their receiver to whatever frequency was actually being generated. In 1941, the problem of frequency instability was solved by coupling ("strapping") alternate cavities within the magnetron. (For an overview of early magnetron designs, including that of Boot and Randall, see [22])

Because France had just fallen to the Nazis and Britain had no money to develop the magnetron on a massive scale, Churchill agreed that Sir Henry Tizard should offer the magnetron to the Americans in exchange for their financial and industrial help (the Tizard Mission). An early 6 kW version, built in England by the General Electric Company Research Laboratories, Wembley, London (not to be confused with the similarly named American company General Electric), was given to the US government in September 1940. At the time the most powerful equivalent microwave producer available in the US (a klystron) had a power of only ten watts. The cavity magnetron was widely used during World War II in microwave radar equipment and is often credited with giving Allied radar a considerable performance advantage over German and Japanese radars, thus directly influencing the outcome of the war. It was later described by noted Historian James Phinney Baxter III as "The most valuable cargo ever brought to our shores".[23]

The Bell Telephone Laboratories made a producible version from the magnetron delivered to America by the Tizard Mission, and before the end of 1940, the Radiation Laboratory had been set up on the campus of the Massachusetts Institute of Technology to develop various types of radar using the magnetron. By early 1941, portable centimetric airborne radars were being tested in American and British aircraft.[24] In late 1941, the Telecommunications Research Establishment in Great Britain used the magnetron to develop a revolutionary airborne, ground-mapping radar codenamed H2S. The H2S radar was in part developed by Alan Blumlein and Bernard Lovell.

Centimetric radar, made possible by the cavity magnetron, allowed for the detection of much smaller objects and the use of much smaller antennas. The combination of small-cavity magnetrons, small antennas, and high resolution allowed small, high quality radars to be installed in aircraft. They could be used by maritime patrol aircraft to detect objects as small as a submarine periscope, which allowed aircraft to attack and destroy submerged submarines which had previously been undetectable from the air. Centimetric contour mapping radars like H2S improved the accuracy of Allied bombers used in the strategic bombing campaign. Centimetric gun-laying radars were likewise far more accurate than the older technology. They made the big-gunned Allied battleships more deadly and, along with the newly developed proximity fuze, made anti-aircraft guns much more dangerous to attacking aircraft. The two coupled together and used by anti-aircraft batteries, placed along the flight path of German V-1 flying bombs on their way to London, are credited with destroying many of the flying bombs before they reached their target.

Since then, many millions of cavity magnetrons have been manufactured; while some have been for radar the vast majority have been for microwave ovens. The use in radar itself has dwindled to some extent, as more accurate signals have generally been needed and developers have moved to klystron and traveling-wave tube systems for these needs.

Health hazards

Caution: radiowaves hazard
Caution: Poisonous particles for the lungs

Among more speculative hazards, at least one in particular is well known and documented. As the lens of the eye has no cooling blood flow, it is particularly prone to overheating when exposed to microwave radiation. This heating can in turn lead to a higher incidence of cataracts in later life.[25] A microwave oven with a warped door or poor microwave sealing can be hazardous.

There is also a considerable electrical hazard around magnetrons, as they require a high voltage power supply.

Some magnetrons have beryllium oxide (beryllia) ceramic insulators, which are dangerous if crushed and inhaled, or otherwise ingested. Single or chronic exposure can lead to berylliosis, an incurable lung condition. In addition, beryllia is listed as a confirmed human carcinogen by the IARC; therefore, broken ceramic insulators or magnetrons should not be directly handled.

See also


  1. ^ "The Magnetron". Bournemouth University. 1995–2009. Retrieved 23 August 2009. 
  2. ^ a b Schroter, B. (Spring 2008). "How important was Tizard’s Box of Tricks?". Imperial Engineer 8: 10. Retrieved 2009-08-23. 
  3. ^ "Who Was Alan Dower Blumlein?". Dora Media Productions. 1999–2007. Retrieved 23 August 2009. 
  4. ^ a b Eli Brookner, "From $10,000 Magee to $7 Magee and $10 Transmitter and Receiver (T/R) on Single Chip", IEEE
  5. ^ Ma, L. "3D Computer Modeling of Magnetrons." University of London Ph.D. Thesis. December 2004. Accessed 2009-08-23.
  6. ^ "Electric Valves: Diodes, Triodes, and Transistors"[
  7. ^ a b c d e f g "The Magnetron"
  8. ^ "The Magnetron"
  9. ^ a b c L.W. Turner,(ed), Electronics Engineer's Reference Book, 4th ed. Newnes-Butterworth, London 1976 ISBN 9780408001687, pages 7-71 to 7-77
  10. ^ "Invention of Magnetron"
  11. ^ Albert W. Hull, "The effect of a uniform magnetic field on the motion of electrons between coaxial cylinders," Physical Review, vol. 18, no. 1, pages 31-57 (1921). See also: Albert W. Hull, "The magnetron," Journal of the American Institute of Electrical Engineers, vol. 40, no. 9, pages 715-723 (September 1921).
  12. ^ Biographical information about August Žáček: (1) R. H. Fürth, Obituary: "Prof. August Žáček," Nature, vol. 193, no. 4816, page 625 (1962); and (2) "The 70th birthday of Prof. Dr. August Žáček," Czechoslovak Journal of Physics, vol. 6, no. 2, pages 204-205 (1956). (For ref. (2), see: .)
  13. ^ Biographical information about Erich Habann: Günter Nagel, "Pionier der Funktechnik. Das Lebenswerk des Wissenschaftlers Erich Habann, der in Hessenwinkel lebte, ist heute fast vergessen" (Pioneer in Radio Technology. The life's work of scientist Erich Habann, who lived in Hessenwinkel, is nearly forgotten today.), Bradenburger Blätter (supplement of the Märkische Oderzeitung, a daily newspaper of the city of Frankfurt in the state of Brandenburg, Germany), 15 December 2006, page 9. See also: Rainer Karlsch and Heiko Petermann, ed.s, Für und Wider "Hitlers Bombe": Studien zur Atomforschung in Deutschland [For and Against "Hitler's Bomb": Studies on atomic research in Germany] (N.Y., N.Y.: Waxmann Publishing Co., 2007), page 251 footnote.
  14. ^ A. Žáček, "Nová metoda k vytvorení netlumenych oscilací" ["New method of generating undamped oscillations"], Časopis pro pěstování matematiky a fysiky [Journal for the Cultivation of Mathematics and Physics], vol. 53, pages 378-380 (May 1924). (Available on-line (in Czech) at: .) See also: A. Žáček, "Über eine Methode zur Erzeugung von sehr kurzen elektromagnetischen Wellen" [On a method for generating very short electromagnetic waves], Zeitschrift für Hochfrequenztechnik [Journal for High Frequency Technology], vol. 32, pages 172-180 (1928). A. Žáček, "Spojení pro výrobu elektrických vln" ["Circuit for production of electrical waves"], Czechoslovak patent no. 20,293 (filed: 31 May 1924; issued: 15 February 1926). Available on-line (in Czech): .
  15. ^ Erich Habann, "Eine neue Generatorröhre" [A new generator tube], Zeitschrift für Hochfrequenztechnik, vol. 24, pages 115-120 and 135-141 (1924)
  16. ^ W. Kaiser, "The Development of Electron Tubes and of Radar technology: The Relationship of Science and Technology," pp. 217 - 236 in O. Blumtritt, H. Petzold and W. Aspray, eds., Tracking the History of Radar, IEEE, Piscataway, NJ, USA, 1994
  17. ^ James E. Brittain, "The magnetron and the beginnings of the microwave age," Physics Today, vol. 38, pages 60-67 (1985).
  18. ^ See for example: (1) Soviet physicists: (i) Abram A. Slutskin and Dmitry S. Shteinberg, ["Obtaining oscillations in cathode tubes with the aid of a magnetic field"], Zhurnal Russkogo Fiziko-Khimicheskogo Obshchestva [Journal of the Russian Physico-Chemical Society], vol. 58, no. 2, pages 395-407 (1926); (ii) Abram A. Slutskin and Dmitry S. Shteinberg, ["Electronic oscillations in two-electrode tubes"], Ukrainski Fizychni Zapysky [Ukrainian Journal of Physics], vol. 1, no. 2, pages 22-27 (1927); (iii) A. A. Slutzkin and D. S. Steinberg, "Die Erzeugung von kurzwelligen ungedämpften Schwingungen bei Anwendung des Magnetfeldes" ["The generation of undamped shortwave oscillations by application of a magnetic field"], Annalen der Physik, vol. 393, no. 5, pages 658-670 (May 1929).
    (2) Japanese engineers: Hidetsugu Yagi, "Beam transmission of ultra-short waves," Proceedings of the Institute of Radio Engineers, vol. 16, no. 6, pages 715-741 (1928). Magnetrons are discussed in Part II of this article. See also: (i) Kinjiro Okabe, ["Production of intense extra-short radio waves by a split-anode magnetron (Part 3)"], Journal of the Institute of Electrical Engineering of Japan, pages 284ff (March 1928); (ii) Kinjiro Okabe, "On the short-wave limit of magnetron oscillations," Proceedings of the Institute of Radio Engineers, vol. 17, no. 4, pages 652-659 (1929); (iii) Kinjiro Okabe, "On the magnetron oscillation of new type," Proceedings of the Institute of Radio Engineers, vol. 18, no. 10, pages 1748-1749 (1930).
  19. ^ "Radar Recollections - A Bournemouth University/CHiDE/HLF project" by a similar multi-cavity magnetron built by Prof. W. E. Burcham
  20. ^ US 2123728  Hans Erich Hollmann/Telefunken GmbH: „Magnetron“ filed November 27, 1935
  21. ^ W. Kaiser, "The Development of Electron Tubes and of Radar technology: The Relationship of Science and Technology," pp. 217 - 236 in O. Blumtritt, H. Petzold and W. Aspray, eds., Tracking the History of Radar, IEEE, Piscataway, NJ, USA, 1994:229
  22. ^ Willshaw, W. E.; L. Rushforth; A. G. Stainsby; R. Latham; A. W. Balls; A. H. King (1946). "The high-power pulsed magnetron: development and design for radar applications". The Journal of the Institution of Electrical Engineers - Part IIIA: Radiolocation 93 (5).  
  23. ^ James Phinney Baxter III (Official Historian of the Office of Scientific Research and Development), Scientists Against Time (Boston: Little, Brown, and Co., 1946), page 142.
  24. ^ Angela Hind (February 5, 2007). "'"Briefcase 'that changed the world. BBC News. Retrieved 2007-08-16. 
  25. ^ Lipman, R. M.; B. J. Tripathi; R. C. Tripathi (1988). "Cataracts induced by microwave and ionizing radiation". Survey of Ophthalmology 33 (3): 200–210.  

External links

  • Magnetrons
  • Magnetron collection in the Virtual Valve Museum
  • Videos of plasmoids created in a microwave oven
  • TMD Magnetrons Information and PDF Data Sheets
  • (Title is somewhat cryptic) Concise, notably-excellent article about magnetrons; Fig. 13 is representative of a modern radar magnetron.
  • US 2123728  Hans Erich Hollmann/Telefunken GmbH: „Magnetron“ filed November 27, 1935
  • US 2315313  Buchholz, H. (1943). Cavity resonator
  • US 2357313  Carter, P.S. (1944). High frequency resonator and circuit therefor
  • US 2357314  Carter, P.S. (1944). Cavity resonator circuit
  • US 2408236  Spencer, P.L. (1946). Magnetron casing
  • US 2444152  Carter, P.S. (1948). Cavity resonator circuit
  • US 2611094  Rex, H.B. (1952). Inductance-capacitance resonance circuit
  • GB 879677  Dexter, S.A. (1959). Valve oscillator circuits; radio frequency output couplings
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.