World Library  
Flag as Inappropriate
Email this Article

JEDEC memory standards

Article Id: WHEBN0010522390
Reproduction Date:

Title: JEDEC memory standards  
Author: World Heritage Encyclopedia
Language: English
Subject: Kilo-, DECpc AXP 150, DEC 4000 AXP, Gigabyte, Units of information
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

JEDEC memory standards

Multiples of bytes
Decimal
Value Metric
1000 kB kilobyte
10002 MB megabyte
10003 GB gigabyte
10004 TB terabyte
10005 PB petabyte
10006 EB exabyte
10007 ZB zettabyte
10008 YB yottabyte
Binary
Value JEDEC IEC
1024 KB kilobyte KiB kibibyte
10242 MB megabyte MiB mebibyte
10243 GB gigabyte GiB gibibyte
10244 - - TiB tebibyte
10245 - - PiB pebibyte
10246 - - EiB exbibyte
10247 - - ZiB zebibyte
10248 - - YiB yobibyte
Orders of magnitude of data

The JEDEC memory standards are the specifications for semiconductor memory circuits and similar storage devices promulgated by the Joint Electron Device Engineering Council (JEDEC) Solid State Technology Association, a semiconductor trade and engineering standardization organization.

JEDEC Standard 100B.01 specifies common terms, units, and other definitions in use in the semiconductor industry. JESC21-C specifies semiconductor memories from the 256 bit static RAM to the latest DDR3 SDRAM modules. In August 2011, JEDEC announced that its DDR4 standard was expected to be published in mid-2012.[1]

JEDEC standardization goals

The Joint Electron Device Engineering Council characterizes its standardization efforts as follows:[2]
JEDEC standards and publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for use by those other than JEDEC members, whether the standard is to be used either domestically or internationally.

JEDEC Standard 100B.01

JEDEC Standard 100B.01 is entitled Terms, Definitions, and Letter Symbols for Microcomputers, Microprocessors, and Memory Integrated Circuits. The purpose of the standard is to promote the uniform use of symbols, abbreviations, terms, and definitions throughout the semiconductor industry.[2]

Units of information

The specification defines the two common units of information:[3]

  • The bit (b) is the smallest unit of information in the binary numeration system and is represented by the digits 0 and 1.
  • The byte (B) is a binary character string typically operated upon as one unit. It is usually shorter than a computer word.

Unit prefixes for semiconductor storage capacity

The specification contains definitions of the commonly used prefixes kilo, mega, and giga usually combined with the units byte and bit to designate multiples of the units.

The specification cites three prefixes as follows:

  • kilo (K): A multiplier equal to 1024 (210).
  • mega (M): A multiplier equal to 1048576 (220 or K2, where K = 1024).
  • giga (G): A multiplier equal to 1073741824 (230 or K3, where K = 1024).

The specification notes that these prefixes are included in the document only to reflect common usage. It refers to the IEEE/ASTM SI 10-1997 standard as stating, that "this practice frequently leads to confusion and is deprecated". However the JEDEC specification does not explicitly deprecate the common usage. The document further refers to the description of the IEC binary prefixes in Amendment 2 of IEC 60027-2, "Letter symbols to be used in electrical technology", for an alternate system of prefixes[notes 1] and includes a table of the IEC prefixes in the note. However the JEDEC specification does not explicitly include the IEC prefixes in the list of general terms and definitions.

The document notes that these prefixes are used in their decimal sense for serial communication data rates measured in bits.

JESD21-C

The standard JESD21-C: Configurations for Solid State Memories is maintained by JEDEC committee JC41. This committee consists of members from manufacturers of microprocessors, memory ICs, memory modules, and other components, as well as component integrators, such as video card and personal computer makers. Additions to Standard 21 are so frequent that it is published in loose-leaf format and comes in a three-ring binder. In the 1980s the configuration of a family of memories could be specified on a single page. Modern memory modules require over 100 pages; standards for the memory IC[4] and a reference design of the module.[5] The standards specify the physical dimensions for the module, the electrical characteristics for the module and even the data for doing computer simulations of the memory module operating in a system.[6]

A memory module like the DDR2-SDRAM is available for laptop, desktop, and server computers. There is also a wide selection of memory capacities and speeds. The standards specify memory module label formats for "End User Markets".[7] For example:

1GB 2Rx4 PC2-3200P-333-11-D2 is a 1 GB DDR2 Registered DIMM, with address/command parity function, using 2 ranks of x4 SDRAMs operational to PC2-3200 performance with CAS Latency = 3, tRCD = 3, tRP = 3, using JEDEC SPD revision 1.1, raw card reference design file D revision 2 used for the assembly.

See also

Notes

  1. ^ Quote from JEDEC Standard 100B.01, page 8:
    The definitions of kilo, giga, and mega based on powers of two are included only to reflect common usage. IEEE/ASTM SI 10-1997 states "This practice frequently leads to confusion and is deprecated." Further confusion results from the popular use of the megabyte representing 1 024 000 bytes to define the capacity of the 1.44-MB high-density diskette. An alternative system is found in Amendment 2 to IEC 60027-2: Letter symbols to be used in electrical technology – Part 2.

References

  1. ^ EE Times. "Jedec readies DDR4 memory spec." August 22, 2011. Retrieved August 25, 2011.
  2. ^ a b JEDEC Solid State Technology Association (December 2002). "Terms, Definitions, and Letter Symbols for Microcomputers, Microprocessors, and Memory Integrated Circuits". JESD 100B.01. p. 8. Retrieved 2009-04-05. 
  3. ^ Ref. ANSI X3.172.
  4. ^ JEDEC, Double Data Rate (DDR) SDRAM Specification (pdf), archived from the original on 2006-10-02, retrieved 2013-08-08 
  5. ^ JEDEC (2007), EP2-2100 DDR2 SDRAM 32b-SO-DIMM Reference Design Specification, retrieved 2009-04-05 
  6. ^ JEDEC, Bit Wide TTL SRAM (pdf), archived from the original on 2003-04-20, retrieved 2013-08-08 
  7. ^ JEDEC, Preliminary publication of JEDEC Semiconductor Memory Standard (pdf), archived from the original on 2007-09-26, retrieved 2013-08-08 

External links

  • Online JEDEC documents
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.